What Input should be used for calculate the isolines of

Topics that do not fit into the other categories
Post Reply
User avatar
Tao PENG
Posts: 7
Joined: 16 Nov 2017, 05:19

What Input should be used for calculate the isolines of

Post by Tao PENG »

Dear all,

I am new to Theriak-Domino and try to recalculate the diagrams in de Capitani (2010). I got all the same results as in Fig.2, except for Fig.2e "Si pfu in Ms", which is related to the isoline calculation.

I tried different ways to input the corresponding phase and data, but none of them worked.The Inputs and results are as follows:

(Name Key Nr min max step)

1. Muscovite Si 1 3 3.4 0.04 ------got no line in the diagram

2. Muscovite EI(Z) 1 3 3.4 0.04 ------got no line in the diagram (I guessed Z might be the defined site (Si, Al) name of Ms, which can be found in database file jun92d,bs)

3. Muscovite EI(Si) 1 3 3.4 0.04 ------got no line in the diagram

4. Muscovite Silicon 1 3 3.4 0.04 ------got no line in the diagram

5. Muscovite Z(Silicon) 1 3 3.4 0.04 ------got no line in the diagram

For comparison, I used Al to check if it worked, but still got nothing.

6. Muscovite Al 2 0.6 1 0.04 ------got no line in the diagram

I also used "list" to check the available phases, found that abbrivation Si represented Sillimanite. Maybe this is the reason why no single line could be calculated, but I am not sure.

Anybody has clues for this issue? Thanks in advance.

Tao.
User avatar
js
Posts: 11
Joined: 21 Nov 2015, 16:04

Re: What Input should be used for calculate the isolines of

Post by js »

Hi Tao,

Look at this thread https://research-talk.org/viewtopic.php?f=4&t=18. There, in the end, there is an answer to your problem

All the best

Jacek
User avatar
Tao PENG
Posts: 7
Joined: 16 Nov 2017, 05:19

Re: What Input should be used for calculate the isolines of

Post by Tao PENG »

Hi Jacek,

Thank you! But still I didn't get it after I saw that thread. What did you mean " when I'm not using scripts chemical composition of the sysem is read from THERIN file"? Then in what way you input the phase and data?

I didn't use script file and all the compositions are from THERIN, even when I tried Pierre's method it still got nothing.
User avatar
Tao PENG
Posts: 7
Joined: 16 Nov 2017, 05:19

Re: What Input should be used for calculate the isolines of

Post by Tao PENG »

Hi Jacek,

Finally I solved the problem. There're two key points in the Input (Name Key Nr min max step): 1. The Name must be the mineral, not the endmember of the mineral; 2. The Key for per formular unit is Element+pfu, like Pierre suggusted in the thread you showed me. For this case, it should be sipfu.

Thus, the right way to Input for calculating Sipfu of Ms is:

White Mica sipfu 1 3 3.4 0.04 (Note: The phase is White Mica not Muscovite)
User avatar
js
Posts: 11
Joined: 21 Nov 2015, 16:04

Re: What Input should be used for calculate the isolines of

Post by js »

Tao,

I am using scripts. Here is an example of such a script. Hopefully, it will help.

Jacek

script.script01d.txt
script01d.plt
JUN92d.bs

    1.0000    300    0.010000   0.1000000E-08   0.1000000E-06   0.1000000E+01 0.1000000E-03     25      25     500
0   SI(61.8085)AL(22.6557)FE(4.9861)MG(2.4803)MN(0.2855)CA(0.6044)NA(2.1119)K(4.4345)TI(0.6330)H(100)O(?)  *  sample PK007b (core of grt I)

TC   350   650
P   3000   25000
WHITE MICA      sipfu    1       3.00      3.80      0.02
1
 0.0000000E+00   0.0000000E+00
_script01d_pix
Post Reply
  • Similar Topics
    Replies
    Views
    Last post