Page 1 of 1

T-X or P-X diagrams

Posted: 23 Mar 2023, 17:29
by Caio Santos
Hello

I'm having a problem in trying to calculate a T-x diagram between two rock compositions, at fixed pressure. I actually don't understand what should I list as the "global" composition (first line of the dat file) in this case. Whatever I put as the "global" composition, I always get the same error message: "Input error: X-min and X-max are the same"

Any help would be greatly apppreciated.

Cheers

Caio

Re: T-X or P-X diagrams

Posted: 24 Mar 2023, 16:24
by Joshua Laughton
Hi Caio,

For the first line I usually just use an average of the end-members. Can you attach your THERIN file?

Cheers,
Josh

Re: T-X or P-X diagrams

Posted: 28 Mar 2023, 16:28
by Caio Santos
Hello Joshua

Thanks for your response. I actually tried the average, and got the same error message. In this case I am interested only in the H2O variation, so all three compositions are the same, except for the H content.

For some reason I can't attach the therin file... But since it is very small, I will copy the text below.

Cheers

Caio

650 6000
1 SI(68.226)AL(28.38)NA(0.44)K(2.6)H(3.0933)CA(0.42)MG(3.77)FE(10.49)TI(1.2)MN(0.17)O(?)O(0.524) *
1 SI(68.226)AL(28.38)NA(0.44)K(2.6)H(6.18)CA(0.42)MG(3.77)FE(10.49)TI(1.2)MN(0.17)O(?)O(0.524) *
1 SI(68.226)AL(28.38)NA(0.44)K(2.6)H(0.0066)CA(0.42)MG(3.77)FE(10.49)TI(1.2)MN(0.17)O(?)O(0.524) *

Re: T-X or P-X diagrams

Posted: 04 Apr 2023, 14:01
by Joshua Laughton
Hi Caio,

For domino, enter "BIN 0 1" for either the x or y axis and then T or P for the other axis such as "TC 500 1000".

Josh

Re: T-X or P-X diagrams

Posted: 05 Apr 2023, 15:59
by Caio Santos
Hello again, Joshua

It worked ! I knew it was going to be something a little silly. Thank you very much for your help !

Cheers

Caio